Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1517598.015 - Mckay Hardwoods Llc

Inspection Information - Office: Toledo

Nr: 1517598.015Report ID: 0524700Open Date: 03/03/2021

Mckay Hardwoods Llc
548 St Rt 95
Loudonville, OH 44842
Union Status: NonUnion
SIC:
NAICS: 321113/Sawmills
Mailing: 548 Ohio 95, Loudonville, OH 44842

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:03/03/2021
Emphasis: N:AmputateClose Case:

Related Activity:TypeIDSafetyHealth
 Accident1741338    
 Inspection1524106   Yes

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 5 5
Current Violations 5 5
Initial Penalty $61,439 $0 $0 $0 $0 $61,439
Current Penalty $61,439 $0 $0 $0 $0 $61,439
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100147 C04 II 06/28/2021 07/06/2021 $13,653 $13,653 $0 07/22/2021 C - Contested
  2. 01002 Serious 19100147 C06 I 06/28/2021 07/06/2021 $13,653 $13,653 $0 07/22/2021 C - Contested
  3. 01003 Serious 19100147 C07 I 06/28/2021 07/06/2021 $13,653 $13,653 $0 07/22/2021 C - Contested
  4. 01004 Serious 19100147 D 06/28/2021 07/06/2021 $13,653 $13,653 $0 07/22/2021 C - Contested
  5. 01005 Serious 19100147 F02 I 06/28/2021 07/08/2021 $6,827 $6,827 $0 07/22/2021 C - Contested

Accident Investigation Summary
Summary Nr: 133762.015Event: 03/03/2021Employee Is Killed After Being Caught In Resaw Machine
At 10:00 a.m. on March 3, 2021, an employee was adjusting a piece of padding on the turner arm of a resaw machine. In order to access the piece, the employee wa s positioned in between the turner arm and a stationary beam of the machine's fr ame. A coworker was directing the employee to use the machine's control panel to raise and lower the turner arm. The coworker did not have a clear sightline to the employee and interpreted a head nod from the employee to push a button and r aise the turner arm. The employee's head/face was caught in a pinch point create d between the turner arm and a stationary beam of the machine's frame, killing h im.
Keywords: bandsaw, caught between, caught by, caught in, crushed, energized, face, frame, head, inspecting, lockout, lockout/tagout, machine cycled, machine guarding, machine shop, machine operator, multi-employer worksite, nip
Inspection Degree Nature Occupation
1 1517598.015 Fatality Sawing machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close