Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1515092.015 - 63509 - Contract Machining And Mfg Co Inc

Inspection Information - Office: Kentucky

Nr: 1515092.015Report ID: 0452110Open Date: 02/17/2021

63509 - Contract Machining And Mfg Co Inc
550 Horton Ctnull
Lexington, KY 40511
Union Status: NonUnion
SIC: 3599/Industrial and Commercial Machinery and Equipment, Not Elsewhere Classified
NAICS: 332710/Machine Shops
Mailing: 550 Horton Ctnull, Lexington, KY 40511

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:06/16/2021
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1735563    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 6 8
Current Violations 2 6 8
Initial Penalty $9,750 $0 $0 $7,000 $0 $16,750
Current Penalty $9,750 $0 $0 $7,000 $0 $16,750
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100212 A01 08/06/2021 08/19/2021 $7,000 $7,000 $0 08/30/2021 C - Contested
  2. 01002A Serious 19101030 C01 II A 08/06/2021 08/30/2021 $2,750 $2,750 $0 08/30/2021 C - Contested
  3. 01002B Serious 19101030 G02 IV 08/06/2021 08/30/2021 $0 $0 $0 08/30/2021 C - Contested
  4. 02001A Other 19040032 A01 08/06/2021 08/16/2021 $7,000 $7,000 $0 08/30/2021 C - Contested
  5. 02001B Other 19040032 A03 08/06/2021 08/16/2021 $0 $0 $0 08/30/2021 C - Contested
  6. 02002 Other 19100144 A01 III 08/06/2021 08/19/2021 $0 $0 $0 08/30/2021 C - Contested
  7. 02003 Other 19100303 B07 IV 08/06/2021 08/16/2021 $0 $0 $0 08/30/2021 C - Contested
  8. 02004 Other 19100303 F01 08/06/2021 08/16/2021 $0 $0 $0 08/30/2021 C - Contested
  9. 02005 Other 19101030 H02 I C 08/06/2021 08/24/2021 $0 $0 $0 08/30/2021 C - Contested
  10. 02006 Other 19101030 H02 I D 08/06/2021 08/24/2021 $0 $0 $0 08/30/2021 C - Contested

Accident Investigation Summary
Summary Nr: 133339.015Event: 02/17/2021Employee Is Killed After Being Pulled Into Lathe
At 2:33 p.m. on February 17, 2021, an employee was operating a Warner & Swasey 4 A M-3580 Turret Lathe. The employee was pulled into the lathe and was asphyxiate d and killed.
Keywords: asphyxiated, caught between, caught by, caught in, emergency response, emergency stop, equipment operator, lathe, machine guarding, machine shop, machine operator, neck, rotating parts, stop switch, warning sign
Inspection Degree Nature Occupation
1 1515092.015 Fatality Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close