Powered by GoogleTranslate

UNITED STATES
DEPARTMENT OF LABOR

Occupational Safety and Health Administration OSHA

Contact Us FAQ A to Z Index English Español

Inspection Detail

Quick Link Reference

1495960.015 | 1249487.015
Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.


Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 2 1 3
Initial Penalty $40,959 $0 $0 $0 $0 $40,959
Current Penalty $27,306 $0 $0 $13,653 $0 $40,959
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 19100147 C06 II 04/02/2021 04/30/2021 $13,653 $13,653 $0 04/23/2021 R - Review Commission
  2. 01002 Serious 19100147 C07 I 04/02/2021 04/30/2021 $13,653 $13,653 $0 04/23/2021 R - Review Commission
  3. 01003A Serious 19100147 D02 04/02/2021 04/30/2021 $13,653 $13,653 $0 04/23/2021 R - Review Commission
Deleted 4. 01003B Serious 19100147 D03 04/02/2021 04/30/2021 $0 $0 $0 04/23/2021 R - Review Commission
Deleted 5. 01003C Serious 19100147 D04 I 04/02/2021 04/30/2021 $0 $0 $0 04/23/2021 R - Review Commission

Accident Investigation Summary
Summary Nr: 130077.015 Event: 10/08/2020Employee Is Struck On Head By Rider Roller, Later Dies
At 8:13 a.m. on October 5, 2020, an employee was preparing to string cast extrus ion line 25. The employee went through the light curtains and ducked under the w inder spindle. The employee proceeded further into the machine and stepped onto the inbound roll changer safety mat that was in front of the spindle. The employ ee found the spindle rope tangled and needed to untangle it to continue threadin g the line. When the employee stepped on the safety mat, the carriage moved forw ard causing the rider roller to fall forward and strike the employee on the head . The employee then fell to the floor striking his head on the ground. The emplo yee was transported to the hospital and died from the head trauma three days lat er.
Keywords: blunt force trauma, falling object, head, struck by
Inspection Degree Nature Occupation
1 1495960.015 Fatality
Case Status: CLOSED

Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 5 5
Current Violations 2 1 3
Initial Penalty $77,604 $0 $0 $0 $0 $77,604
Current Penalty $24,000 $0 $0 $8,000 $0 $32,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001A Serious 19100146 C01 01/22/2018 02/08/2018 $12,934 $12,934 $0 02/09/2018 F - Formal Settlement
Deleted 2. 01001B Serious 19100146 C02 01/22/2018 02/08/2018 $0 $0 $0 02/09/2018 F - Formal Settlement
Deleted 3. 01001C Serious 19100146 C04 01/22/2018 02/08/2018 $0 $0 $0 02/09/2018 F - Formal Settlement
  4. 01002A Serious 19100147 C04 I 01/22/2018 02/08/2018 $12,000 $12,934 $0 02/09/2018 F - Formal Settlement
  5. 01002B Serious 19100147 D04 I 01/22/2018 02/08/2018 $0 $12,934 $0 02/09/2018 F - Formal Settlement
Deleted 6. 01003 Serious 19100147 C05 I 01/22/2018 02/08/2018 $12,934 $12,934 $0 02/09/2018 F - Formal Settlement
  7. 01004 Serious 19100147 C07 I A 01/22/2018 02/08/2018 $12,000 $12,934 $0 02/09/2018 F - Formal Settlement
  8. 01005 Other 19100147 C07 III A 01/22/2018 02/08/2018 $8,000 $12,934 $0 02/09/2018 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 97487.015 Event: 07/25/2017Employee Is Crushed And Killed While Adjusting Printing Pres
At 11:39 a.m. on July 25, 2017, an employee was performing some maintenance on a printing press armiture and opened an access panel. The employee stuck his hea d inside the access panel and a coworker started the equipment, not realizing th at the employee was in the machine. The employee's skull was crushed and the em ployee killed.
Keywords: caught in, crushing, lockout/tagout, machine guarding, maintenance, printing press, skull
Inspection Degree Nature Occupation
1 1249487.015 Fatality Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close