Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Alert: Due to routine maintenance on the OSHA website, some pages may be temporarily unavailable.
To report an emergency, file a complaint with OSHA or ask a safety and health question, call 1-800-321-6742 (OSHA).

Inspection Detail

Case Status: CLOSED
Inspection: 1482669.015 - Tri-County Welding & Fabrication, Llc

Inspection Information - Office: Peoria

Nr: 1482669.015Report ID: 0524500Open Date: 07/09/2020

Tri-County Welding & Fabrication, Llc
147 W Cumberland St.Null
Martinsville, IL 62442
Union Status: NonUnion
SIC:
NAICS: 238160/Roofing Contractors
Mailing: P.O. Box 137null, Arthur, IL 61911

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:09/11/2020
Emphasis: L:FallClose Case:01/13/2021

Related Activity:TypeIDSafetyHealth
 Accident1618947    
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 2 2
Initial Penalty $17,812 $0 $0 $0 $0 $17,812
Current Penalty $13,359 $0 $0 $0 $0 $13,359
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 5A0001 09/21/2020 10/06/2020 $5,567 $7,422 $0 I - Informal Settlement
  2. 01002 Serious 19260501 B10 09/21/2020 10/21/2020 $7,793 $10,390 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 127636.015Event: 07/08/2020Employee Is Killed In Fall From Flat Roof
At 3:30 p.m. on July 8, 2020, Employee #1 and a coworker, employed by a construc tion company, were removing steel roof panels from the flat roof of a three-stor y manufacturing building in preparation for installing a new roof. The roof pan els measured approximately 1.5 feet wide by 25 feet long. The removal process e ntailed walking on an aluminum scaffold pick rather than the unsuitable work sur face of the roof panels. The two employees were required to use a fall protecti on system of self-retracting lifelines attached to metal roof swivel anchors, Pa rt Number 390RSA-01, with shock-absorbing lanyards and harnesses, which were pro vided by the employer. However, when the employees returned to the roof after a lunch break, they did not attach their harnesses to the lifelines. As they lif ted a roof panel, one employee at each end of the panel, a gust of wind blew the steel panel onto the employees' legs. Employee #1 lost his balance and fell fr om the scaffold pick, a total fall height of 35 feet. Employee #1 sustained mul tiple fractures and blunt force trauma and was killed by the fall.
Keywords: anchor, blunt force trauma, construction, dismantling, fall, fall protection, fracture, high wind, lifeline, lost balance, roof, roofer, scaffold pic, struck by, walking surface, work surface
Inspection Degree Nature Occupation
1 1482669.015 Fatality Roofers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close