Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.


Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $20,250 $0 $0 $810 $0 $21,060
Current Penalty $20,250 $0 $0 $810 $0 $21,060
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3650(T)(15) 07/07/2020 $810 $810 $0 06/23/2020 C - Contested
  2. 02001 Serious 3650(L) 07/07/2020 $20,250 $20,250 $0 06/23/2020 C - Contested

Accident Investigation Summary
Summary Nr: 125646.015 Event: 04/23/2020Employee Is Struck And Killed By Falling Load Of Angle Iron
At 10:16 p.m. on April 23, 2020, an employee was working for a metal service cen ter and wholesale merchant of other metal goods. He was a fulltime permanent emp loyee. He was working the second shift. The site was a metals processing facilit y that handled various sizes of angle iron and other metal structural items. Wor kers were inventorying and moving metal structural pieces. The employee was stan ding in an aisle doing inventory procedures. He was not involved in any material handling at the time. The employee's second shift supervisor was nearby, operat ing a Toyota model number 52-6FGCU33 forklift, with serial number 61858, T-01. T he forklift was carrying a load of angle iron. The angle iron was 50 millimeters by 75 millimeters in dimension, with a thickness of 6.35 millimeters (2 inches by 3 inches on dimension, with a thickness of 0.25 inches). The load weighed 885 kilograms (1,950 pounds). When the truck abruptly stopped, the load slid off th e tips of the forklift. It struck the employee as it fell to the ground. The emp loyee suffered fatal blunt force trauma to his head and neck. He was killed. His body was transported via the Riverside County coroner to the morgue. An investi gator from DOSH arrived onsite at or about 1:00 p.m. on the following day. The e mployer was cited serious accident related violation for 3650(l). Prior to and during the course of the Investigation, including, but not limited to April 23, 2020, the employer failed to ensure that the load being transported by a forklif t was balanced, braced, or secured to prevent it from falling. The following fac tors would have prevented the accident: proper securing of the load to prevent i t from falling, and carrying the load as low as possible.
Keywords: aisle, blunt force trauma, falling object, forklift, forks, head, industrial truck, iron, material handling, metal shop, neck, powered industrial vehicle, steel, struck by, unstable load
Inspection Degree Nature Occupation
1 1473213.015 Fatality Occupation Not Listed

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close