Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1472995.015 - Reading Rock Inc.

Inspection Information - Office: Cincinnati

Nr: 1472995.015Report ID: 0522000Open Date: 04/23/2020

Reading Rock Inc.
4600 Devitt Dr.Null
Cincinnati, OH 45241
Union Status: NonUnion
NAICS: 327121/Brick and Structural Clay Tile Manufacturing
Mailing: 4600 Devitt Dr.Null, Cincinnati, OH 45241

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:08/20/2020
Emphasis: N:AmputateClose Case:

Related Activity:TypeIDSafetyHealth
Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 1 1 2
Initial Penalty $28,070 $0 $0 $0 $0 $28,070
Current Penalty $6,000 $0 $0 $0 $0 $6,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 19100028 B15 08/26/2020 10/14/2020 $0 $13,494 $0 I - Informal Settlement
  2. 01002A Serious 19100147 D 08/26/2020 09/29/2020 $6,000 $13,494 $0 I - Informal Settlement
  3. 01002B Other 19100147 C06 I 08/26/2020 09/22/2020 $0 $1,082 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 125592.015Event: 04/23/2020Employee Is Crushed Between Platens On Banding Machine
At 7:15 a.m. on April 23, 2020, an employee was working for a manufacturer of br ick and structural clay tile. Among the firm's products was pavers. Pavers had t o be banded for shipment. Two machines were required. There was a machine to ban d horizontally and another machine to band vertically. One machine, a Signode AM 514 Z-20 plastic strapping machine, had jammed. It was prone to frequent jams. A jam would occur once or twice per shift. Usually the jams could be cleared by reversing the machine, but not always. The employee was clearing a jam from the banding machine. To reach the jam, he went up on a stack of pavers. He was posit ioned 1.4 meters (57 inches) above the floor. As he was diagnosing why the bandi ng machine was not working properly, the machine activated. The employee was cau ght between the pavers and the machine. He was crushed in the machine's point of operation. He suffered internal injuries, and he was killed.
Keywords: caught between, caught in, crushed, fall protection, jammed, lockout, maintenance, point of operation
Inspection Degree Nature Occupation
1 1472995.015 Fatality Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.