Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: PENDING ABATEMENT OF VIOLATIONS

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1459477.015 - Gas Turbine Efficiency, Llc

Inspection Information - Office: Tampa

Nr: 1459477.015Report ID: 0420600Open Date: 01/30/2020

Gas Turbine Efficiency, Llc
300 Sunport Ln Suite 100
Orlando, FL 32809
Union Status: NonUnion
SIC:
NAICS: 423830/Industrial Machinery and Equipment Merchant Wholesalers
Mailing: 300 Sunport Ln Suite 100 , Orlando, FL 32809

Inspection Type:Fat/Cat
Scope:Complete Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:02/04/2020
Emphasis: L:ForkliftClose Case:

Related Activity:TypeIDSafetyHealth
 Accident1538987    
Case Status: PENDING ABATEMENT OF VIOLATIONS

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $13,494 $0 $0 $0 $0 $13,494
Current Penalty $13,494 $0 $0 $0 $0 $13,494
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100022 D02 07/09/2020 08/04/2020 $13,494 $13,494 $0 Z - Issued

Accident Investigation Summary
Summary Nr: 123592.015Event: 01/29/2020Employee Is Struck And Killed By Falling Control Panel
At 5:50 p.m. on January 29, 2020, an employee helped move a large electrical panel into place using a winch, tow strap, and plastic furniture moving strips. This panel was part of a control room that was being set up in a portable type trailer. While being pulled by the winch, the panel turned and went over a floor opening that was not covered, then the panel tipped over. The employee moved from the back end of the panel and attempted to prevent the panel from hitting the wall. The employee's head got caught between the panel and the wall of the trailer. The employee sustained a hinge fracture at the base of the skull from the impact of a falling panel and the employee's head caught between the panel and wall. The employee was killed by this incident.
Keywords: overturn, concussion, floor opening, head, fracture, falling object, caught between, struck by, skull
Inspection Degree Nature Occupation
1 1459477.015 Fatality Other

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close