Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1453952.015 - 61357 - Molding Machinery Services Llc

Inspection Information - Office: Kentucky

Nr: 1453952.015Report ID: 0452110Open Date: 01/03/2020

61357 - Molding Machinery Services Llc
11509 Aa Highway Northnull
Foster, KY 41043
Union Status: NonUnion
SIC: 5084/Industrial Machinery and Equipment
NAICS: 423830/Industrial Machinery and Equipment Merchant Wholesalers
Mailing: 8483 Bridle Court Attn Amy Limingnull, Florence, KY 41042

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:04/07/2020
Close Case:

Related Activity:TypeIDSafetyHealth
Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 2 5
Current Violations 3 2 5
Initial Penalty $21,000 $0 $0 $3,500 $0 $24,500
Current Penalty $21,000 $0 $0 $3,500 $0 $24,500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 338.31(1)(A) 05/28/2020 06/05/2020 $7,000 $7,000 $0 06/24/2020 C - Contested
  2. 01002 Serious 19100178 A04 05/28/2020 06/09/2020 $7,000 $7,000 $0 06/24/2020 C - Contested
  3. 01003 Serious 19100178 L01 I 05/28/2020 06/05/2020 $7,000 $7,000 $0 06/24/2020 C - Contested
  4. 02001 Other 2.180(3)(1)(A) 05/28/2020 06/01/2020 $3,500 $3,500 $0 06/24/2020 C - Contested
  5. 02002 Other 19100132 D02 05/28/2020 06/10/2020 $0 $0 $0 06/24/2020 C - Contested

Accident Investigation Summary
Summary Nr: 122965.015Event: 12/09/2019Employee Is Crushed During Equipment Roll-Over And Is Killed
At 6:00 p.m. on December 9, 2019, an employee lifted a Toshiba Injection Molding Machine using a Toyota Model Number FGCU Lift Truck when the machine fell from the forks. The employee left the forklift and was checking on the state of the fallen machine when it shifted further and pinned him against the wall, crushing him. The employee was pronounced dead on scene.
Keywords: asphyxiated, caught by, crushed, forklift, molding machine, pinned, powered industrial vehicle
Inspection Degree Nature Occupation
1 1453952.015 Fatality Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.