Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED

Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 4 4
Current Violations 2 1 3
Initial Penalty $37,507 $0 $0 $0 $0 $37,507
Current Penalty $12,190 $0 $0 $3,657 $0 $15,847
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 19040039 A02 08/14/2019 $3,657 $5,626 $0 I - Informal Settlement
  2. 01002 Serious 19100147 C04 II B 08/14/2019 10/01/2019 $6,095 $9,377 $0 I - Informal Settlement
  3. 01003 Serious 19100147 C07 I 08/14/2019 10/01/2019 $6,095 $9,377 $0 I - Informal Settlement
Deleted 4. 01004 Serious 19100212 A03 II 08/14/2019 $13,127 $13,127 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 115558.015 Event: 04/12/2019Employee Fractures Arm While Clearing Jam In Plastics Extrud
At 1:05 p.m. on April 12, 2019, an employee was working for a firm that manufact ured plastic bags and pouches. He was working in a production area. The producti on area had lines with plastic extrusion machines. Along with a coworker, the em ployee had the task of changing filters on the machines. On at least one machine , a ram feeder had been added to the extruder or extrusion machine. One of the m achines had jammed. Part of the ram, a hammer, was stuck inside. The employee wa s clearing out the ram when his hand became caught in the machine. He suffered a fracture to the radius in his right arm. He was hospitalized. According to the coworker in an interview later, the machine would become jammed when it was over come with too much plastic. When this happened, the workers would stop the machi ne, turn off the air and use an 0.7-meter (2-foot) wooden stick to remove the ma terial stuck in the ram. The ram became stuck with material one to two times per week, depending on the material. Cleaning took about four to five minutes. The machine was cleaned on all shifts, and the coworker cleaned the machine on May 7 , 2019. Generally, compressed air was used to clear jammed plastic from the mach ine. The lockout/tagout program provided by the employer did not have documented training for the employee or his coworker.
Keywords: arm, caught by, caught in, compressed air, fracture, hand, jammed, lockout, lockout/tagout, ram, training, work rules
Inspection Degree Nature Occupation
1 1394684.015 Hospitalized injury Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.