Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: VIOLATIONS UNDER CONTEST

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1377671.015 - German Machined Products Inc

Inspection Information - Office: Ca Long Beach District Office

Nr: 1377671.015Report ID: 0950635Open Date: 02/11/2019

German Machined Products Inc
1415 W 178th St
Gardena, CA 90248
Union Status: NonUnion
SIC:
NAICS: 336413/Other Aircraft Parts and Auxiliary Equipment Manufacturing
Mailing: 1415 W 178th St, Gardena, CA 90248

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/08/2019
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1425433    
Case Status: VIOLATIONS UNDER CONTEST

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 3 5
Current Violations 2 3 5
Initial Penalty $50,000 $0 $0 $2,435 $0 $52,435
Current Penalty $50,000 $0 $0 $2,435 $0 $52,435
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203(A)(4) 08/07/2019 08/26/2019 $1,125 $1,125 $0 09/25/2019 -
  2. 01002 Other 3314(G)(2)(A) 08/07/2019 08/26/2019 $375 $375 $0 09/25/2019 -
  3. 01003 Other 3314(J) 08/07/2019 08/26/2019 $935 $935 $0 09/25/2019 -
  4. 02001 Serious 3314(C) 08/07/2019 $25,000 $25,000 $0 09/25/2019 -
  5. 03001 Serious 3314(L)(1) 08/07/2019 08/26/2019 $25,000 $25,000 $0 09/25/2019 -

Accident Investigation Summary
Summary Nr: 113531.015Event: 02/11/2019Employee'S Head Is Fractured, Killing Him
At 12:45 p.m. on February 11, 2019, an employee was conducting the cleaning of milling machines (model number: AWEA FCV-620) with a coworker. As the employee opened the small gated doors and accessed the rear compartment of one of the milling machines, he was struck in the back of the head and killed. The incident investigation determined that the machines axis activated, moving its home position forward and drove the employee's head into the machine's frame. The employee suffered a fractured skull.
Keywords: struck by, milling machine, metal shop, maintenance, head, lockout/tagout, cleaning
Inspection Degree Nature Occupation
1 1377671.015 Fatality Other Laborers, except construction

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close