Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1373109.015 - Lyneer Staffing Solutions, Llc

Inspection Information - Office: Ca Santa Ana District Office

Nr: 1373109.015Report ID: 0950631Open Date: 01/24/2019

Lyneer Staffing Solutions, Llc
22700 Savi Ranch Pkwy.Null
Yorba Linda, CA 92887
Union Status: NonUnion
SIC:
NAICS: 561311 
Mailing: 1068 N. State College Blvd.Null, Anaheim, CA 92806

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:03/29/2019
Close Case:03/29/2019

Related Activity:TypeIDSafetyHealth
 Accident1418215    
 Inspection1373412 Yes  

Accident Investigation Summary
Summary Nr: 112856.015Event: 01/16/2019Employee Lacerates Finger In Grommet Machine
At 11:00 a.m. on January 16, 2019, Employee #1, who primarily worked in shipping , was told by her supervisor that she would be working in another area, using a Pneumatic Grommet Machine, Micron America PL-10, placing grommet holes in banner s. This was done by placing the banner under the die and holding it in place wit h two hands while stepping on a foot-operated device to activate the press. The employee was provided hands-on training by another non-supervisory employee, wh o explained how to use the machine and showed her how to operate the machine thr ough 2-3 cycles. The grommet machine contains a barrier guard attached to the up per portion of the unit, which descends prior to the upper die being activated. The barrier guard measures three-quarters inches from the upper die, exceeding t he one-quarter inch allowed under Table G-3, which allows space for a finger to be placed into the danger zone from above the barrier guard. Employee #1 operate d the pneumatic grommet machine for approximately 1-2 hours. The machine appeare d to malfunction, so a supervisor disconnected the air hose and reconnected it, which appeared to solve the problem. While placing a washer on the lower die, t he top die came down, severing the tip (soft tissue only) of her right index fin ger. She did not recall if she accidently stepped on the foot pedal or if the di e came down on its own. Employee #1 suffered a finger laceration when the gromme t machine's upper die came down onto her right index finger. She was transported , treated and released at a nearby hospital.
Keywords: caught by, die, finger, grommet machine, laceration
Inspection Degree Nature Occupation
1 1373109.015 Non Hospitalized injury Printing machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close