Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: VIOLATIONS UNDER CONTEST

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1336942.015 - Colleen & Herb Enterprises, Inc.

Inspection Information - Office: Ca Fremont District Office

Nr: 1336942.015Report ID: 0950612Open Date: 08/08/2018

Colleen & Herb Enterprises, Inc.
46939 Bayside Parkway
Fremont, CA 94538
Union Status: NonUnion
SIC:
NAICS: 332710/Machine Shops
Mailing: 46939 Bayside Parkway, Fremont, CA 94538

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:01/07/2019
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1366675    
Case Status: VIOLATIONS UNDER CONTEST

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 1 4
Current Violations 3 1 4
Initial Penalty $54,000 $0 $0 $750 $0 $54,750
Current Penalty $54,000 $0 $0 $750 $0 $54,750
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203(A)(2) 01/09/2019 $750 $750 $0 01/28/2019 -
  2. 02001 Serious 3328(B) 01/09/2019 $18,000 $18,000 $0 01/28/2019 -
  3. 03001 Serious 3384(B) 01/09/2019 $18,000 $18,000 $0 01/28/2019 -
  4. 04001 Serious 4002(A) 01/09/2019 $18,000 $18,000 $0 01/28/2019 -

Accident Investigation Summary
Summary Nr: 110623.015Event: 08/02/2018Employee Partially Amputates Thumb When Pulled Into Lathe
At 9:30 a.m. on August 2, 2018, an employee was polishing a part on a GS-200 machine where he had bypassed the interlock. The employee was wearing a glove on his right hand and caught it with the spinning chuck. The employee had his thumb pulled into the machine and he amputated a portion of this thumb while the chuck was spinning at 1,000 RPMs. The employee was taken to the hospital, where he was admitted for treatment.
Keywords: struck by, glove, amputation, lathe, thumb, amputated, caught by
Inspection Degree Nature Occupation
1 1336942.015 Hospitalized injury Amputation Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close