Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED
Inspection: 1335751.015 - Mahle Engine Components Usa, Inc.

Inspection Information - Office: Iowa

Nr: 1335751.015Report ID: 0751910Open Date: 08/02/2018

Mahle Engine Components Usa, Inc.
60428 Marne Roadnull
Atlantic, IA 50022
Union Status: NonUnion
SIC:
NAICS: 336312/Gasoline Engine and Engine Parts Manufacturing
Mailing: 60428 Marne Roadnull, Atlantic, IA 50022

Inspection Type:Referral
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/02/2018
Close Case:09/26/2018

Related Activity:TypeIDSafetyHealth
 Referral1340191 Yes  
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 1 1 2
Initial Penalty $11,086 $0 $0 $778 $0 $11,864
Current Penalty $5,543 $0 $0 $778 $0 $6,321
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Serious 19100147 E01 08/22/2018 10/09/2018 $5,543 $5,543 $0 I - Informal Settlement
  2. 01002A Serious 19100212 A01 08/22/2018 10/09/2018 $5,543 $5,543 $0 I - Informal Settlement
  3. 01002B Serious 19100145 C03 08/22/2018 10/09/2018 $0 $0 $0 I - Informal Settlement
  4. 02001 Other 19040029 B01 08/22/2018 10/09/2018 $778 $778 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 107972.015Event: 05/21/2018Employee Is Struck By Flying Steel Cap From Lathe And Is Hos
At 9:00 a.m. on May 21, 2018, an employee was using a 1956 Monarch Machine Tool Co Lathe Machine Number 0253, located in the tool and die room. The employee ha d completed setting up the lathe and starting to turn down a rubber slitter roll ers on a shop made fixture. As the lathe came up to speed that was set for appr oximately 685 RPM, the employee was struck in the face by the steel fixture cap when it spun off. The employee was hospitalized.
Keywords: face, flying object, struck by
Inspection Degree Nature Occupation
1 1335751.015 Hospitalized injury Tool and die makers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close