Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1310422.015 - Ace Design & Construction Inc

Inspection Information - Office: Ca San Bernardino

Nr: 1310422.015Report ID: 0950633Open Date: 04/20/2018

Ace Design & Construction Inc
72322 Hwy 111
Palm Desert, CA 92260
Union Status: NonUnion
SIC:
NAICS: 236220/Commercial and Institutional Building Construction
Mailing: 7455 Arroyo Crossing Suite #220, Las Vegas, NV 89113

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:09/26/2018
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1324584    
Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 3 5
Current Violations 2 3 5
Initial Penalty $40,500 $0 $0 $1,495 $0 $41,995
Current Penalty $36,000 $0 $0 $1,495 $0 $37,495
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 1509(A) 09/26/2018 10/22/2018 $375 $375 $0 11/01/2018 W - Empr Withdrew
  2. 01002 Other 1509(E) 09/26/2018 10/22/2018 $560 $560 $0 11/01/2018 D - Govt Dismissed
  3. 01003 Other 3556(A) 09/26/2018 10/22/2018 $560 $560 $0 11/01/2018 W - Empr Withdrew
  4. 02001 Serious 3556(B) 09/26/2018 10/10/2018 $18,000 $20,250 $0 11/01/2018 J - ALJ Decision
  5. 03001 Serious 4307(B) 09/26/2018 10/10/2018 $18,000 $20,250 $0 11/01/2018 J - ALJ Decision

Accident Investigation Summary
Summary Nr: 109501.015Event: 03/29/2018Employee Using Circular Saw Amputates Fingers
At 12:00 p.m. on March 29, 2018, Employee #1, employed by a construction company, was engaged in interior carpentry at a three-story commercial building project. He was operating a Skilsaw Model SPT77WML Circular Saw, Serial Number 701002988, to rip wooden boards for interior framing. The power saw's running blades came into contact with his left hand, and three fingers were amputated. Emergency services were called, and Employee #1 was transported to the hospital, admitted, and treated for the finger amputations.
Keywords: struck by, finger, amputation, electric saw, wood erection, carpenter, circular saw, construction, blade, struck against
Inspection Degree Nature Occupation
1 1310422.015 Hospitalized injury Amputation

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close