Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1306170.015 - Siu'S Products And Distributor, Inc.

Inspection Information - Office: Ca Oakland

Nr: 1306170.015Report ID: 0950614Open Date: 03/28/2018

Siu'S Products And Distributor, Inc.
1067 45th Avenue
Oakland, CA 94606
Union Status: NonUnion
SIC:
NAICS: 493110/General Warehousing and Storage
Mailing: 700 Kevin Court, Oakland, CA 94621

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/22/2018
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1321263    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 2 5
Current Violations 2 1 3
Initial Penalty $45,675 $0 $5,250 $0 $0 $50,925
Current Penalty $26,775 $0 $700 $0 $0 $27,475
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Repeat 3203(A) 08/31/2018 $2,625 $2,625 $0 10/12/2018 Y - State Decision
  2. 02001 Repeat 3314(G)(2)(A) 08/31/2018 $700 $2,625 $0 10/12/2018 Y - State Decision
  3. 03001 Serious 3314(D) 08/31/2018 $7,875 $7,875 $0 10/12/2018 Y - State Decision
Deleted 4. 04001 Serious 3314(L)(1) 08/31/2018 $18,900 $18,900 $0 10/12/2018 Y - State Decision
  5. 05001 Serious 4187(A) 08/31/2018 $18,900 $18,900 $0 10/12/2018 Y - State Decision

Accident Investigation Summary
Summary Nr: 108214.015Event: 03/19/2018Employee Setting Up Plastic Film Cutting Machine Sustains La
At 2:57 p.m. on March 19, 2018, an employee was setting up a C40 plastic film cu tting machine. The employee was feeding product with the machine in standby posi tion. The machine was not deenergized. The employee mistakenly hit the start but ton rather than the jog feed button or using the manual feed handle. The employe e's hand was caught between two rollers and sustained a laceration to the left t humb and loss of distal pad and skin tissue on the volar side of the thumb.
Keywords: caught between, hand, laceration, lockout/tagout, roller--mach/part, set up, thumb
Inspection Degree Nature Occupation
1 1306170.015 Non Hospitalized injury Mechanical engineering technicians

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close