Powered by GoogleTranslate

Inspection Detail

Case Status: PENALTY PAYMENT PLAN IN PLACE

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1281084.015 - Automated Manufacturing, Inc.

Inspection Information - Office: Milwaukee

Nr: 1281084.015Report ID: 0523400Open Date: 12/05/2017

Automated Manufacturing, Inc.
N115w19280 Edison Drive
Germantown, WI 53022
Union Status: NonUnion
SIC:
NAICS: 332710/Machine Shops
Mailing: N115w19280 Edison Drive, Germantown, WI 53022

Inspection Type:Fat/Cat
Scope:Complete Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:12/14/2017
Emphasis: N:Amputate, L:PivClose Case:

Related Activity:TypeIDSafetyHealth
 Accident1289975    
Case Status: PENALTY PAYMENT PLAN IN PLACE

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 4 1 1 6
Current Violations 4 1 1 6
Initial Penalty $11,828 $44,342 $0 $0 $0 $56,170
Current Penalty $4,000 $21,000 $0 $0 $0 $25,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19100215 A01 05/31/2018 $1,000 $2,218 $0 I - Informal Settlement
  2. 01002 Serious 19100215 A04 05/31/2018 $1,000 $2,218 $0 I - Informal Settlement
  3. 01003 Serious 19100303 B01 05/31/2018 $1,000 $3,696 $0 I - Informal Settlement
  4. 01004 Serious 19100303 G01 05/31/2018 $1,000 $3,696 $0 I - Informal Settlement
  5. 02001 Willful 19100212 A01 05/31/2018 06/12/2018 $21,000 $44,342 $0 I - Informal Settlement
  6. 03001 Other 19100179 L03 III D 05/31/2018 $0 $0 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 101255.015Event: 12/05/2017Employee Is Struck By Flying Object From Machine And Is Kill
At 2:30 p.m. on December 5, 2017, an employee was operating a CNC Machine when a part flew out from the machine and struck him in the face and head. The employee suffered several broken bones and was killed.
Keywords: struck by, fracture, head, flying object, face
Inspection Degree Nature Occupation
1 1281084.015 Fatality Asphyxia Machinists

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close