Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1280430.015 - Pcc Rollmet, Inc.

Inspection Information - Office: Ca Santa Ana District Office

Nr: 1280430.015Report ID: 0950631Open Date: 12/01/2017

Pcc Rollmet, Inc.
1822 Deere Avenuenull
Irvine, CA 92606
Union Status: NonUnion
NAICS: 336415/Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing
Mailing: 1822 Deere Avenuenull, Irvine, CA 92606

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:05/30/2018
Close Case:

Related Activity:TypeIDSafetyHealth

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 4 2 6
Current Violations 4 2 6
Initial Penalty $76,950 $0 $0 $1,515 $0 $78,465
Current Penalty $76,950 $0 $0 $1,515 $0 $78,465
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203(A) 05/30/2018 07/12/2018 $675 $675 $0 07/05/2018 C - Contested
  2. 01002 Other 3314(J) 05/30/2018 07/02/2018 $840 $840 $0 07/05/2018 C - Contested
  3. 02001 Serious 3273(I) 05/30/2018 06/11/2018 $16,200 $16,200 $0 07/05/2018 C - Contested
  4. 03001 Serious 3314(L) 05/30/2018 06/11/2018 $20,250 $20,250 $0 07/05/2018 C - Contested
  5. 04001 Serious 3314(D) 05/30/2018 06/11/2018 $20,250 $20,250 $0 07/05/2018 C - Contested
  6. 05001 Serious 4002(A) 05/30/2018 06/11/2018 $20,250 $20,250 $0 07/05/2018 C - Contested

Accident Investigation Summary
Summary Nr: 101165.015Event: 12/01/2017Employee Strikes Head Against Sanding Equipment And Is Kille
At 8:30 a.m. on December 2017, an employee was changing a sanding belt on an OD Sander, Equipment #511. The employee had moved the right wheel inward to increa se slack on the sanding belt and then removed it. The equipment was left runnin g which meant that the shaft, chuck and a pipe were rotating when the left sleev e of the employee was caught in the chuck. The employee's arm and body were pul led into and around the chuck. The employee struck his head and was killed at th e site.
Keywords: arm, caught by, entangled, head, lockout, sanding machine, struck by
Inspection Degree Nature Occupation
1 1280430.015 Fatality Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.