Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations
Initial Penalty $0 $0 $0 $750 $0 $750
Current Penalty $0 $0 $0 $0 $0 $0
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Other 3314 C 04/11/2006 04/14/2006 $0 $750 $0 05/26/2006 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 201147337 Event: 10/14/2005Employee'S Finger Is Amputated In Drill Press
On October 14, 2005, Employee #1, a machining technician with an aerospace fastening systems manufacturer, was operating a Wilton automated Drill Press (Number 2825). This press was used for beveling round aircraft fasteners (30 mm outside diameter, 15 mm inside diameter, and 15 mm high). Employee #1 picked up a fastener with an extension tool and placed into the drill chuck for beveling. She then activated the beveling process by simultaneously placing both hands on the machine safety trip pads. At that time, the beveling bit came down, failed to make contact with the fastener, and retracted up to its start position. She repeated the process, however, the press malfunctioned and stayed in the start position. When Employee #1 noticed that the fastener was positioned upside down, she released the chuck pressure, and tried unsuccessfully to remove the fastener with an extension tool. Assuming the malfunctioning press would not reactivate, Employee #1 attempted to remove the fastener again by placing her right index finger in the center of the fastener. When the press activated unexpectedly, the countersink bit came down and amputated her finger between the first and second joint.
Keywords: amputated, finger, interlock, equipment failure, jammed, point of operation, drill press, extension handle, press operator, press
Inspection Degree Nature Occupation
1 125947010 Non Hospitalized injury Amputation Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.