Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1252283.015 - Omnimax Group Inc.

Inspection Information - Office: Ca San Bernardino

Nr: 1252283.015Report ID: 0950633Open Date: 08/03/2017

Omnimax Group Inc.
28921 E. Hwy 74null
Romoland, CA 92585
Union Status: NonUnion
NAICS: 337920/Blind and Shade Manufacturing
Mailing: 28921 E. Hwy 74null, Romoland, CA 92585

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:01/16/2018
Close Case:08/31/2020

Related Activity:TypeIDSafetyHealth

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 1 2 3
Initial Penalty $24,750 $0 $0 $5,000 $0 $29,750
Current Penalty $18,000 $0 $0 $3,300 $0 $21,300
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342(A) 01/16/2018 02/02/2018 $3,000 $5,000 $0 03/26/2018 O - Administrative Law Judge Order
  2. 02001 Other 4206(A) 01/16/2018 $300 $6,750 $0 03/26/2018 O - Administrative Law Judge Order
  3. 03001 Serious 4193(E) 01/16/2018 01/26/2018 $18,000 $18,000 $0 03/26/2018 O - Administrative Law Judge Order

Accident Investigation Summary
Summary Nr: 102077.015Event: 07/31/2017Employee Suffers Partial Amputation To His Fingers While Mol
At 2:30 p.m. on July 31, 2017, Employee #1 was operating a Scallop Press, DSCM-2 X6.5-3X8, Serial number 9949-B, making tails for the patio rafters. The employee had made about 60 tails. As he put the material in the press, he pushed the two hand control buttons to complete the cycle. The employee tried to pull the fini shed part, but the cycle repeated and the blade blocks closed. His right index f inger and middle finger got caught between the blade blocks, causing an amputati on of his index finger to the first knuckle and a laceration to the middle finge r. Employee #1 was taken to the health clinic where he was treated and released the same day. Upon inspection, the point of operation was not guarded properly a nd the two hand control did not have the anti-repeat feature functional at the t ime of the accident which caused the serious injury.
Keywords: amputation, blade, blocks, caught between, finger, laceration, machine guarding, molding machine, press
Inspection Degree Nature Occupation
1 1252283.015 Non Hospitalized injury Production helpers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.