Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED
Inspection: 1226789.015 - Slice And Dice Concrete And Breaking Inc.

Inspection Information - Office: Ca Monrovia District Office

Nr: 1226789.015Report ID: 0950644Open Date: 03/24/2017

Slice And Dice Concrete And Breaking Inc.
15311 Whittier Blvd.
Whittier, CA 90603
Union Status: NonUnion
SIC:
NAICS: 238110/Poured Concrete Foundation and Structure Contractors
Mailing: 5935 Rickenbacker Avenue, Riverside, CA 92504

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:03/24/2017
Close Case:02/26/2018

Related Activity:TypeIDSafetyHealth
  1204232    
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 3 3
Initial Penalty $0 $0 $0 $455 $0 $455
Current Penalty $0 $0 $0 $255 $0 $255
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 15300001 E01 09/01/2017 10/09/2017 $0 $165 $0 09/18/2017 O - Administrative Law Judge Order
  2. 01002 Other 3319(A) 09/01/2017 10/09/2017 $180 $180 $0 09/18/2017 O - Administrative Law Judge Order
  3. 01003 Other 3395(E) 09/01/2017 10/09/2017 $75 $110 $0 09/18/2017 O - Administrative Law Judge Order

Accident Investigation Summary
Summary Nr: 98646.015Event: 03/24/2017Employee Operating Power Saw Incurs Burns
At 2:30 p.m. on March 2, 2017, Employee #1 and Coworker #1, employed by a construction company specializing in concrete work, were engaged in concrete pavement cutting work at a job site. Employee #1 was operating a Husqvarna K 1260 power hand saw to make a 6-inch deep cut along a 17-foot line in the pavement. Throughout the process, the cutting sporadically generated sparks, a common phenomenon during concrete cutting. Employee #1 saw a fire ball next to his right foot and then realized the saw was on fire. He threw the saw away from his body, but not before the fire had ignited on his legs. Coworker #1 attempted to assist Employee #1. Emergency services were called, and Employee #1 was transported to the hospital. He was admitted and treated for second degree burns to his hands and third degree burns to his legs. During the subsequent investigation, the investigator learned that the hand saw's gas cap had not been adequately secured when the saw was fueled. The saw's aggressive vibration caused fuel to spill onto the equipment and Employee #1's legs. Sparks from the cutting process then ignited the fuel.
Keywords: saw, fuel oil, hand tool, leg, hand, combustible liquid, spill, unsecured, burn, vibrations
Inspection Degree Nature Occupation
1 1226789.015 Hospitalized injury Burn/Scald(Heat) Construction trades, n.e.c.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close