Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: OPEN

Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.

Inspection: 1208876.015 - Bovard Studio Inc.

Inspection Information - Office: Ca Sacramento

Nr: 1208876.015Report ID: 0950621Open Date: 02/08/2017

Bovard Studio Inc.
7869 Kingswood Drive
Citrus Heights, CA 95610
Union Status: NonUnion
SIC:
NAICS: 238150/Glass and Glazing Contractors
Mailing: 2281 Business Highway 34, Fairfield, IA 52556

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:03/21/2017
Close Case:

Related Activity:TypeIDSafetyHealth
 Accident1179840    
Case Status: OPEN

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 2 2
Initial Penalty $0 $0 $0 $5,960 $0 $5,960
Current Penalty $0 $0 $0 $810 $0 $810
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Other 342(A) 03/29/2017 $0 $5,000 $0 I - Informal Settlement
  2. 01002 Other 1509(A) 03/29/2017 $465 $550 $0 I - Informal Settlement
  3. 01003 Other 3395(I) 03/29/2017 $345 $410 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 92937.015Event: 01/30/2017Worker Is Injured When Saw Kicks Back
At 9:00 a.m. on January 30, 2017, Employee #1, employed by a specialty glass company, was engaged in exterior carpentry at a commercial building. He was operating a Ridgid circular saw, 6.2 inches, powered by an 18 volt battery, to cut a 3 feet long 2 by 4 piece of wood window trim. The trim was needed to complete a window installation. The saw kicked back and cut the tip of Employee #1's left thumb. Emergency services were called, and Employee #1 was transported to the hospital. He was admitted, and medical personnel performed an amputation to repair the tip of his thumb. The subsequent investigation was unable to determine why the saw kicked back. The saw was properly guarded and the blade was sharp. Employee #1 was wearing leather gloves, but the gloves did not prevent the injury.
Keywords: thumb, laceration, amputation, installing, carpenter, construction, kick back, glove, circular saw, building
Inspection Degree Nature Occupation
1 1208876.015 Hospitalized injury Amputation Glaziers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close