Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 1089362.015 - Advanced Veneer Technologies, Inc.

Inspection Information - Office: Savannah

Nr: 1089362.015Report ID: 0418400Open Date: 08/31/2015

Advanced Veneer Technologies, Inc.
248 Collins Roadnull
Lyons, GA 30436
Union Status: NonUnion
SIC:
NAICS: 321211/Hardwood Veneer and Plywood Manufacturing
Mailing: 248 Collins Roadnull, Lyons, GA 30436

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:08/31/2015
Emphasis: L:ForkliftClose Case:02/06/2017

Related Activity:TypeIDSafetyHealth
 Accident1015295    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 2 1 3
Initial Penalty $7,000 $0 $0 $700 $0 $7,700
Current Penalty $4,200 $0 $0 $0 $0 $4,200
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 5A0001 02/10/2016 $2,940 $4,900 $0 I - Informal Settlement
  2. 01002 Serious 19100023 D01 III 02/10/2016 $1,260 $2,100 $0 I - Informal Settlement
  3. 02001 Other 19040029 B01 02/10/2016 03/08/2016 $0 $700 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 79279.015Event: 08/31/2015Employee Is Killed When Struck By Unstable Load
At 9:28 a.m. on August 31, 2015, Employee #1, a dryer operator, was working alon e, staging 2 piles of moisture-laden veneer to manually feed a 3-tier dryer mac hine with motor-driven rollers. The first pile was situated on the floor, suppor ted by a 4 inch by 4 inch block of wood that was 5 feet by 10 inches by 27 inche s. The second pile was situated on a Bishamon lift-table, Model No. HLT-045-36-2 4048; SN 991086; with a weight capacity of 4,500 lbs. and piled 85 inches high. The lift-table platform was elevated 28 inches, including a custom-made pallet which was 44 inches by 47 inches by 7.5 inches. The lift table platform was 47 inches by 22 inches, as designed. A channel-iron modification increased the plat form width to 48 inches. The employee began manually feeding the first pile in to the dryer which was 48 inches high, from within a 26 inch space between the d ryer and the piles, reaching over and stepping to the left in order to keep the feed across rollers balanced. As the lift-table remained erect, the second pile , weighing 3,160 lbs., fell onto Employee #1, crushing and killing him.
Keywords: crushed, elevated work platform, falling object, hydraulic lift, struck by, unstable load
Inspection Degree Nature Occupation
1 1089362.015 Fatality Occupation Not Listed

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close