Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED
Inspection: 1019255.015 - Ridewell Corporation

Inspection Information - Office: Kansas City

Nr: 1019255.015Report ID: 0728500Open Date: 01/20/2015

Ridewell Corporation
3715 East Farm Road
Springfield, MO 65803
Union Status: Union
SIC:
NAICS: 336399/All Other Motor Vehicle Parts Manufacturing
Mailing: 3715 East Farm Road 94, Springfield, MO 65803

Inspection Type:Fat/Cat
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:05/21/2015
Emphasis: P:Amputate, N:AmputateClose Case:11/09/2016

Related Activity:TypeIDSafetyHealth
 Accident933003    
Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1
Initial Penalty $0 $70,000 $0 $1,000 $0 $71,000
Current Penalty $7,000 $0 $0 $0 $0 $7,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001A Serious 5A0001 06/11/2015 04/15/2016 $7,000 $70,000 $0 06/26/2015 F - Formal Settlement
  2. 01001B Serious 19100212 A03 II 06/11/2015 04/15/2016 $0 $0 $0 06/26/2015 F - Formal Settlement
Deleted 3. 02001 Other 19040040 A 06/11/2015 $0 $1,000 $0 06/26/2015 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 70085.015Event: 01/19/2015Employee Is Killed When Struck By Misaligned Bushing.
At approximately 3:30 p.m. on January 19, 2015, an employee was repairing a part, as the bushing was installed incorrectly. The employee had to remove the bushing then rotate it to reinstall it the correct direction. The employee was using a hydraulic press, a cup to fit over the bushing to extend down to the outer sleeve of the bushing and a metal spacer that was placed between the end of the ram since the stroke of the ram was not long enough to reach the part. When the part was loaded into the press the cup was misaligned with the bushing causing it to set at a slight angle. When the employee applied pressure the uneven pressure pushed the bushing out and hit the employee in the chest. The impact broke the employee's ribs and punctured his heart. The employee was killed.
Keywords: puncture, hydraulic press, mechanic, chest, rib, struck by
Inspection Degree Nature Occupation
1 1019255.015 Fatality Cut/Laceration Assemblers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close