Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 731984 - Employee'S Finger Amputated In Drill Press

Accident: 731984 -- Report ID: 0551800 -- Event Date: 03/29/1985
InspectionOpen DateSICEstablishment Name
275821704/01/19853714Dawa Corporation Spicer Clutch Div
At approximately 2:10 a.m. on March 29, 1985, Employee #1 was removing a drill bit from the spindle on a drill press after drilling some holes. He did not use the neutral switch on the main disconnect box to shut the power off to the drill press. The employee used his right hand to hold the drift pin that was put in the drift pin hole on the spindle and his left hand to hold down the feed lever. The employee first turned the spindle forward and reversed the OFF switch. He then used the down feed to move the spindle up and down while holding the drift pin with his right hand. The drift pin hit the bottom of the drill press frame. The resulting vibration caused the actuating arm to kick in and start up the spindle. Employee #1's right hand became trapped between the drift pin and the guide bar and his right finger was amputated at the first joint. The actuating arm had a malfunctioning part in it.
Keywords: amputated, finger, work rules, equipment failure, lockout, vibrations, caught between, drill press
Employee # Inspection Age Sex Degree Nature Occupation
1 2758217 Hospitalized injury Amputation Tool and die makers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close