Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 509208 - Employee Killed In Mill Hammer (Chipper) Hog

Accident: 509208 -- Report ID: 1032500 -- Event Date: 07/26/1993
InspectionOpen DateSICEstablishment Name
10723339707/28/19932421Louisiana-Pacific Corporation
Employee #1 was working at the feed conveyor for the planer hammer hog. The conveyor was a vibrator trough type with the top edge of the trough approximately 20 in. above the floor. A gate guard was located above the conveyor between the work station and the hog. The gate was approximately 22 in. above the bottom of the trough, leaving an opening of 22 in. deep by 29 in. wide. The safety line and belt used to protect employees feeding the hog had been removed when the gate was installed. Employee #1 fell onto the conveyor and was transported under the gate guard and into the running hammer hog. He was killed instantly. A citation was issued for an inadequately guarded hog.
Keywords: chipper, conveyor, fall, unguarded
Employee # Inspection Age Sex Degree Nature Occupation
1 107233397 Fatality Cut/Laceration Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close