Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 202553954 - Employee'S Hand Is Injured When Caught In Machine

Accident: 202553954 -- Report ID: 0950631 -- Event Date: 07/26/2011
InspectionOpen DateSICEstablishment Name
31552614509/28/20112653International Paper Co
On July 26, 2011, Employee #1, with a cardboard box manufacturer, was operating a Hamada Flexo Folder machine (Type 13mpg - 2500000000, Order Number RA-160). This machine would fold and cut flat cardboard sheets for box components. A conveyor held a stack of flat cardboard sheets that would be automatically fed into the machine, one at a time, by a plate that pushed them through a 1 in. opening. The sheet would then be pulled by rollers that were located 3 in. inboard of the machine frame. The top roller was rubber and the bottom roller was steel. Employee #1 placed his hand into the opening and the rollers degloved his fingers. He was hospitalized for treatment. The inspection determined that the opening was too large in relation to the nip point.
Keywords: finger, degloved, machine operator, caught by, laceration, point of operation, nip point, unguarded
Employee # Inspection Age Sex Degree Nature Occupation
1 315526145 Hospitalized injury Other Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.