Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 202446589 - Employee Amputates Thumb While Using Circular Saw

Accident: 202446589 -- Report ID: 0950633 -- Event Date: 04/11/2007
InspectionOpen DateSICEstablishment Name
31059850304/30/20071771Etivista Concrete Inc
At approximately 7:20 a.m. on April 11, 2007, Employee #1 was cutting a V-ditch (swale) form out of a 2-in. by 12-in. by 3.5-in. board using a Skilsaw (Model Number HD77M, 7.25-in., 4400 rpm). Employee #1 held the stock in his left hand and the saw in the right hand to make a cut. During cutting, the saw blade jumped and contacted Employee #1's left thumb causing amputation. Employee #1 was hospitalized.
Keywords: kick back, amputated, construction, thumb, circular saw
End Use Proj Type Proj Cost Stories NonBldgHt Fatality
Commercial building New project or new addition $50,000 to $250,000
Employee # Inspection Age Sex Degree Nature Occupation Construction
1 310598503 Hospitalized injury Amputation Carpenters FallDist:
FallHt:
Cause: Forming
FatCause: Other

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close