Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 201694320 - Employee Amputates Fingers In Metal Fabricating Machine

Accident: 201694320 -- Report ID: 0950662 -- Event Date: 03/19/2010
InspectionOpen DateSICEstablishment Name
31475933303/20/20123317Searing Industries
At approximately 1:15 p.m. on March 19, 2010, Employee #1 fabricating metal tubing from sheet metal on the Tube Mill #4 in Department 501. On Tube Mill #4, an estimated eight-inch open area existed between the run-out table and the end of the metal frame of the cut-off system. A metal, hydraulic cylinder (reciprocating, horizontal, estimated three-inches diameter) moved in and out of this open area. This cylinder was part of the cut-off system. Employee #1, working on the run-out table, placed his left hand in a section of this open area. The cylinder moved outward toward the run-out table and pinned Employee #1's ring and middle fingers on his left hand against the table, amputating them. Employee #1 was employed by Searing Industries who fabricated sheet metal into tubing of varying lengths and sizes. The cause of this accident was failure for the parts of this mill (exposed hydraulic cylinder and run-off table), which created a hazardous pinch point, to be guarded.
Keywords: amputated, cylinder, finger, pinned, metal sheet, unguarded
Employee # Inspection Age Sex Degree Nature Occupation
1 314759333 Hospitalized injury Amputation Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close