Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 201030533 - Employee Injured When Crushed Between Lift Cage And Beam

Accident: 201030533 -- Report ID: 0950635 -- Event Date: 01/28/1997
InspectionOpen DateSICEstablishment Name
12029594402/28/19971541Washington Iron Works
At 2:30 p.m. on January 28, 1997, Employee #1, an iron worker with Washington Iron Works, was in the basket of a Snorkelift aerial device truck, welding steel on the roof structure of a building under construction. He was working alone and needed to reposition himself to improve his access to the job. Employee #1 was at the controls and was moving the aerial lift when his back became caught between a steel roof beam and the basket cage. He was leaning forward with his head down, but with his left hand he somehow switched the EMERGENCY button. At this point he was experiencing severe chest pains and he could not talk or move his body. Shortly thereafter, his supervisor walked into the building and saw Employee #1 pinned against the beam. He alerted several coworkers outside the building and they helped extricate Employee #1. He suffered crushing chest injuries and was transported to San Pedro (CA) Peninsula Hospital. The main causal factors in this accident were (1) failure to ensure that Employee #1 was specifically trained for this type of work, in accordance with the lift manufacturer's recommendations; and (2) failure on the part of Employee #1 to survey the vicinity to determine possible obstructions before moving the aerial device.
Keywords: chest, iron worker, work rules, construction, caught between, crushed, steel erection, untrained, aerial lift, inattention
End Use Proj Type Proj Cost Stories NonBldgHt Fatality
Other building New project or new addition Under $50,000 1
Employee # Inspection Age Sex Degree Nature Occupation Construction
1 120295944 Hospitalized injury Fracture Structural metal workers FallDist:
FallHt:
Cause: Roofing
FatCause: Crushed/run-over by construction equipment during

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close