Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 200678167 - Employee Is Electrocuted While Painting Building Exterior

Accident: 200678167 -- Report ID: 0418800 -- Event Date: 09/30/2010
InspectionOpen DateSICEstablishment Name
31426571109/30/20101721Complete Concrete & Painting, Llc
At approximately 9:28 a.m. on September 30, 2010, Employee #1 and a coworker were working from a suspended scaffold to paint a residential building. As Employee #1 used an extendable roller pole to reach the top of the building, the pole contacted an overhead power line. Employee #1 was electrocuted. The accident investigation revealed that Employee #1 had not been given training regarding safety procedures while working within 10 feet of power lines.
Keywords: electrocuted, elec circ part--misc, painter, utility pole, scaffold
End Use Proj Type Proj Cost Stories NonBldgHt Fatality
Multi-family dwelling Alteration or rehabilitation $50,000 to $250,000 4 X
Employee # Inspection Age Sex Degree Nature Occupation Construction
1 314265711 Fatality Electric Shock Occupation not reported FallDist:
Cause: Exterior painting
FatCause: Electrocution by equipment contacting wire

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.