Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 200151231 - Employee Is Struck And Killed By Falling Crane Boom

Accident: 200151231 -- Report ID: 0214700 -- Event Date: 06/01/2007
InspectionOpen DateSICEstablishment Name
30763702506/18/20071794Ken Rousell, Inc.
Employee #1 was part of a field crew disassembling a section of latticed boom attached to a truck crane. The boom was held 3-ft to 4-ft off the ground by the crane pendants that were attached to the end boom section (identified as section #1). Employee #1 was removing boom section #2 (the section behind #1). Employee #1 removed the cotter pins from the lower connector pins and drove out one connector pin out with a hammer and metal bar. Employee #1 went to the other side and drove out the other lower connector pin out causing the boom to fall on him. Employee #1 was killed.
Keywords: crane boom, struck by, disconnecting means, falling object, crane
End Use Proj Type Proj Cost Stories NonBldgHt Fatality
Shoreline development, dam, reservoir Maintenance or repair Under $50,000 X
Employee # Inspection Age Sex Degree Nature Occupation Construction
1 307637025 Fatality Other Occupation not reported FallDist:
FallHt:
Cause: Dredging
FatCause: Crushed/run-over by construction equipment during

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close