Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 170903603 - Employee'S Hand Amputated In Punch Press When Ram Breaks

Accident: 170903603 -- Report ID: 0950644 -- Event Date: 03/12/1996
InspectionOpen DateSICEstablishment Name
11976562603/13/19963714Centerline Tool Corp.
At approximately 2:00 p.m. on March 12, 1996, Employee #1, of the Centerline Tool Corporation, Santa Fe Springs, CA, was making a 15 in. die aluminum wheel on a 650-ton E. W. Bliss punch press, model 511, serial # 2684-1928-9682. He was picking up the finished part from the machine when the shaft of the ram broke. The ram/die fell on his right hand, amputating it. Subsequent investigation revealed no accident-related violations of T8CCR. The employer was cited for other violations of T8CCR.
Keywords: die, amputated, equipment failure, point of operation, shaft, press operator, punch press, hand, ram
Employee # Inspection Age Sex Degree Nature Occupation
1 119765626 Hospitalized injury Amputation Punching and stamping press machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.