Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 170198295 - Employee'S Feet Fractured By Falling Axle

Accident: 170198295 -- Report ID: 0950651 -- Event Date: 02/18/1991
InspectionOpen DateSICEstablishment Name
11192743002/26/199114427/11 Materials Inc
At approximately 10:00 a.m. on February 18, 1991, Employee #1 was using an oxygen and acetylene torch to cut axle cap bolts while salvaging parts off a Wabco 666 grader. When he finished the cuts, Employee #1 used a mechanics bar to pry off the axle caps. The torch had caused a heat-induced failure of a 5/16 in. chain that supported the axle assembly and the chain separated, allowing the axle assembly to fall on his feet. Employee #1 suffered broken and crushed metatarsals in both feet. He later stated that he was well trained, experienced, and aware that he had removed safety blocking while working under the suspended load. Employee #1 was wearing hard-toed shoes at the time of the accident.
Keywords: fracture, acetylene torch, unsecured, work rules, equipment failure, struck by, falling object, broken chain, cutting and burning, foot
Employee # Inspection Age Sex Degree Nature Occupation
1 111927430 Hospitalized injury Fracture Welders and cutters

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close