Powered by GoogleTranslate

UNITED STATES
DEPARTMENT OF LABOR

Occupational Safety and Health Administration OSHA

Contact Us FAQ A to Z Index English Español

Return to Accident Search Results

Accident Report Detail

Accident: 14513873 - Employee Struck By Flying Pieces Of Metal

Accident: 14513873 -- Report ID: 0524700 -- Event Date: 07/17/1984
InspectionOpen DateSICEstablishment Name
130549907/17/19843469Midwest Stamping & Manufacturing Co
EMPLOYEE #1 WAS OPERATING A BLISS MODEL 513, 1000 TON MECHANICAL POWER PRESS, RESTAMPING METAL PARTS (9/16" THICK X 4" X 6", WEIGHING 3 LBS EACH). THE PARTS WOULD FALL ONTO THE BOLSTER PLATE BELOW THE LOWER DIE. THE OPERATOR WAS SUPPOSED TO PUSH THESE PARTS TO THE BACK OF THE PRESS WITH A PIECE OF WOOD EVERY 3 OR 4 PIECES. HE FAILED TO PUSH THE PARTS CLEAR UNTIL 18 PIECES ACCUMULATED ON TOP OF THE BOLSTER AND UP INTO THE LOWER DIE. THE RAM BOTTOMED OUT AGAINST THIS ACCUMULATION, CAUSING TWO PIECES TO FLY OUT TOWARD THE FRONT OF THE PRESS. THE PIECES STRUCK THE OPERATOR IN THE CHEST, CAUSING FATAL INJURIES TO THE RIGHT LUNG AND RIGHT VENTRICLE.
Keywords: chest, lung, ventricle, power press, flying object, press
Employee # Inspection Age Sex Degree Nature Occupation
1 1305499 Fatality Concussion Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close