Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 14383616 - Employees Crushed To Death By Collapsing Lift

Accident: 14383616 -- Report ID: 0524530 -- Event Date: 02/02/1995
InspectionOpen DateSICEstablishment Name
10654970202/03/19953316H.S. Processing L.P. A Delaware Ltd. Partnership
Employees #1 and #2 were repairing a small hydraulic cylinder on a scissor lift scrap table. The three cylinders were in the bottom of a concrete pit that measured about 8 1/2 ft by 6 1/2 ft by 9 1/2 ft deep. The employees raised the scissor lift to its maximum height, clearing the adjacent floor level by about 10 in. They then placed the forks from a 9,000 lb Caterpillar fork truck under the steel table, which was secured to the top of the lift on one side for extra support. After the employees finished the repair, they began to hook up the cylinder. It was then that the pressure on the hydraulic lines caused the scrap table to pivot upward, slide off the forks, and collapse into the pit, crushing Employees #1 and #2 to death within seconds.
Keywords: collapse, work rules, hydraulic cylinder, crushed, industrial truck, pit, falling object, aerial lift
Employee # Inspection Age Sex Degree Nature Occupation
1 106549702 Fatality Puncture Occupation not reported
2 106549702 Fatality Puncture Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close