Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 127627.015 - Employee Is Caught In Or Between And Is Killed By The Steel

Accident: 127627.015 -- Report ID: 0453730 -- Event Date: 03/17/2020
InspectionOpen DateSICEstablishment Name
1470465.01503/18/20202426145125 - Dimension Wood Products, Inc.
At 4:25 p.m. on March 17, 2020, an employee was observed sweeping in the machine room near the MZ Pluris CNC Bandsaw Machine. The Pluris is a multi-axis CNC mac hining center, which was equipped with an industrial bandsawing system and also a 3 axis high-speed electro spindle, which was mounted on a gantry frame and sec urely fixed to either side of the main machine frame. The machine had dimensio ns consisting of 23.9 feet in length x 14.10 feet in width x 8.5 in height. The table height measured 3 feet and was moved by a ball bearing screw and brushless motor and traveled along the X-AXIS (which would be length). The upper table wa s mechanically linked to the lower table in order to effect both together the sa me longitudinal forward/backward movement. The table also traveled along the Y-A XIS which would be the width. While the employee was in the area of the unguard ed machine, the machine operated and a large metal attachment of the machine (th e lower table) and pinned the employee against a support steel beam. The distanc e between the steel beam and the machine was approximately 5 inches. The employ ee was crushed, and the steel beam punctured the employee's chest. The employee was killed.
Keywords: bandsaw, caught between, caught in, chest, puncture, steel beam, unguarded
Employee # Inspection Age Sex Degree Nature Occupation
1 1470465.015 56 M Fatality Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close