Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Accident Report Detail

Accident: 115784.015 - Employee Is Killed By Hay Press Stacker

Accident: 115784.015 -- Report ID: 0950632 -- Event Date: 04/29/2019
InspectionOpen DateSICEstablishment Name
1396619.01504/29/2019K & M Press, Inc.
At 11:11 p.m. on April 29, 2019, two employees, a mechanic and an operator, were repairing a fluid leak on a hydraulic cylinder hose of the magazine clamp eleva tor located on the output product handling system of the Hunterwood Press. The c lamp elevator is actuated by a vertical cylinder and was in the up position. The clamp was loaded with a large bale of hay which weighs approximately 890 pounds . The mechanic went under the load and clamp to replace a hydraulic seal on the hydraulic hose. After loosening the hydraulic hose fitting, hydraulic fluid was released causing the vertical cylinder to lose pressure dropping the clamp and l oad on the employee, which killed him.
Keywords: caught in, crushed, hydraulic cylinder, hydraulic press, repair
Employee # Inspection Age Sex Degree Nature Occupation
1 1396619.015 25 M Fatality Mechanical engineering technicians

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close