Translate
Violation Detail
Standard Cited: 19100023 C01 Ladders.
Inspection Nr: 994253.015
Citation: 01003
Citation Type: Serious
Abatement Date: 04/08/2015 2
Initial Penalty: $5,940.00
Current Penalty: $4,228.00
Issuance Date: 03/04/2015
Nr Instances: 2
Nr Exposed: 7
Related Event Code (REC):
Gravity: 5
Report ID: 0830500
Contest Date:
Final Order: 03/25/2015
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/25/2015 | $4,228.00 | 04/08/2015 | Serious | |
| Penalty | Z: Issued | 03/04/2015 | $5,940.00 | 04/08/2015 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard:
29 CFR 1910.23(c)(1): Open-sided floors or platforms 4 feet or more above adjacent floor or ground levels were not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder: (a) Atlas Metal & Iron Corporation at 100 Umatilla St., Denver, CO 80204: On or before September 5, 2014 the employer did not ensure open-sided platforms that were 4 feet or more above ground level were guarded by a standard railing or the equivalent, in that the upper platform on the south MTB did not have guardrails installed on the west side. This condition exposed employees to fall hazards of more than four feet. (b) Atlas Metal & Iron Corporation at 100 Umatilla St., Denver, CO 80204: On or before September 5, 2014 the employer did not ensure open-sided floors that were 4 feet or more above ground levels were guarded by a standard railing or the equivalent, in that the top rail on the outside of the work platform of the SIERRA baler hopper was measured at 37 inches.