Violation Detail
Standard Cited: 19100132 D02 General requirements.
Inspection Nr: 941602.015
Citation: 02001
Citation Type: Other
Abatement Date: 04/30/2014 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/04/2014
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity:
Report ID: 0728900
Contest Date:
Final Order: 03/19/2014
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/19/2014 | $0.00 | 04/30/2014 | Other | |
| Penalty | Z: Issued | 03/04/2014 | $0.00 | 04/03/2014 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed: The employer failed to protect employees from potential electrical, struck by and caught between hazards associated with working throughout a facility where the employer has not conducted effective job hazard assessments whereby they have identified all of the potential hazards and developed mitigating methods to prevent employees from being injured. This was most recently evident during the inspection of the facility located 5 miles NW of Albion on Hwy 14, Albion, NE 68620, where the employer has employees both maintaining and operating trucks, front end loaders, trailers, mill conveyors and other pieces of equipment without having conducted in depth job hazard assessments whereby the employer would have identified the hazards and risks and thus developed the safety method of performing the tasks with the least amount of risk. Instances include but are not limited to: i. Employee welding during fabrication has on welding gloves and welding helmet but no safety glasses or hard hat.
Translate