Translate
Violation Detail
Standard Cited: 19100213 H01 Woodworking machinery requirements.
Inspection Nr: 920866.015
Citation: 01004
Citation Type: Serious
Abatement Date: 09/20/2013 2
Initial Penalty: $2,800.00
Current Penalty: $2,800.00
Issuance Date: 09/10/2013
Nr Instances: 2
Nr Exposed: 3
Related Event Code (REC):
Gravity: 10
Report ID: 0524200
Contest Date:
Final Order: 10/07/2013
Emphasis:
| Failure to Abate | |||||||
|---|---|---|---|---|---|---|---|
| Activity Nr | Issuance | Penalty | Contest | Final Order | |||
| 958122 | 02/25/2014 | $3,870.00 | 03/18/2014 | ||||
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| FTA | I: Informal Settlement | 03/18/2014 | $3,870.00 | 03/07/2014 | 958122.015 | |
| FTA | Z: Issued | 02/25/2014 | $8,400.00 | 03/07/2014 | 958122.015 | |
| Penalty | Z: Issued | 09/10/2013 | $2,800.00 | 09/20/2013 | Serious |
Text For Citation: 01 Item/Group: 004 Hazard:
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: (a) Warehouse - The sides of the lower exposed portion of the blades on the Tops Power Radial Arm saw # 55508, were not equipped with a guard. (b) Warehouse - The sides of the lower exposed portion of the blades on the Tops Power Radial Arm saw # 71744, was being help up with a bungee cord not allowing the guard to automatically adjust itself to the thickness of the blade.