Violation Detail
Standard Cited: 19100303 A General.
Inspection Nr: 893833.015
Citation: 01007
Citation Type: Serious
Abatement Date: 06/02/2014 2
Initial Penalty: $3,500.00
Current Penalty: $2,125.00
Issuance Date: 06/06/2013
Nr Instances: 1
Nr Exposed: 4
Related Event Code (REC):
Gravity: 5
Report ID: 0729300
Contest Date: 06/18/2013
Final Order: 03/20/2014
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $2,125.00 | 06/02/2014 | Serious | ||
| Penalty | F: Formal Settlement | 03/20/2014 | $2,125.00 | 04/19/2014 | Serious | |
| Penalty | C: Contested | 07/01/2013 | $3,500.00 | 07/24/2013 | Serious | |
| Penalty | Z: Issued | 06/06/2013 | $3,500.00 | 07/24/2013 | Serious |
Text For Citation: 01 Item/Group: 007 Hazard:
29 CFR 1910.303(a): The conductors and/or equipment required or permitted by this subpart were not approved: The W.S. Rockwell electric oven, s/n S966 (tagged 42 KW, 440 Volt, 3 phase, 60 cycles, 55 amperes per line), was manufactured on or about 07/03/1963 and then redesigned by W.S. Rockwell on or about 05/19/1964. The oven was installed at Davis Tool and Die sometime on or before 05/21/1993 and the oven wiring of heating elements has been modified from the manufacturers design. The oven has not been approved or inspected by an authority responsible for enforcing occupational safety provisions of the National Electrical Code since the installation at Davis Tool and Die located at 888 Bolger Ct, Fenton, MO, 63026.
Translate