Translate
Violation Detail
Standard Cited: 19100305 G01 IV A Wiring methods, components, and equipment for general use.
Inspection Nr: 794801.015
Citation: 03004
Citation Type: Other
Abatement Date: 05/21/2014 2
Initial Penalty: $0.00
Current Penalty: $5,667.00
Issuance Date: 05/31/2013
Nr Instances: 1
Nr Exposed: 2
Related Event Code (REC):
Gravity:
Report ID: 0830500
Contest Date: 06/20/2013
Final Order: 07/16/2014
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/16/2014 | $5,667.00 | 05/21/2014 | Other | |
| Penalty | C: Contested | 06/26/2013 | $0.00 | 06/26/2013 | Other | |
| Penalty | Z: Issued | 05/31/2013 | $0.00 | 06/26/2013 | Other |
Text For Citation: 03 Item/Group: 004 Hazard:
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) JBS USA, LLC at 800 North 8th Avenue, Greeley, CO 80631: On or about December 4, 2012, the employer allowed the use of flexible cords as a substitute for permanent wiring in the following instances: 1) The 440 volt Cram-A-Lot bailer/compactor was powered through the use of a 105 inch long flexible cord, draped between the controls and the power source, that inhibited the operator's workstation; and 2) The 480 volt 25 ton hydraulic power press located in the slaughter mechanical shop included a flexible cord and plug that stretched across the entryway to the room, for plug in on the opposite side of the room. Condition exposed employee to electrical shock hazards.