Violation Detail
Standard Cited: 19100252 A03 I General requirements.
Inspection Nr: 779021.015
Citation: 01002
Citation Type: Serious
Abatement Date: 04/29/2013 2
Initial Penalty: $2,800.00
Current Penalty: $0.00
Issuance Date: 04/17/2013
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 10
Report ID: 0214700
Contest Date:
Final Order: 04/29/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/29/2013 | $0.00 | 04/29/2013 | Serious | |
| Penalty | Z: Issued | 04/17/2013 | $2,800.00 | 04/29/2013 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.252(a)(3)(i): Welding, cutting, or other hot work was performed on used drums, barrels, tanks, or other containers that had not been cleaned so thoroughly as to make absolutely certain there were no flammable materials present or any substance: Worksite, rear yard; 127 Whittier Dr., Mastic Beach, NY - Employee used a hand held, gas powered, cut-off machine to cut open an above ground storage tank. The operation caused ignition of material, #2 Fuel Oil, contained within the tank on, or about, 12/11/12. Note: In addition to abatement certification, the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Translate