Violation Detail
Standard Cited: 19100217 F02 Mechanical power presses.
Inspection Nr: 457997.015
Citation: 02001
Citation Type: Other
Abatement Date: 08/09/2012 2
Initial Penalty: $0.00
Current Penalty: $200.00
Issuance Date: 07/19/2012
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC):
Gravity:
Report ID: 0524700
Contest Date: 07/31/2012
Final Order: 10/28/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/28/2013 | $200.00 | 08/09/2012 | Other | |
| Penalty | C: Contested | 07/31/2012 | $0.00 | 08/09/2012 | Other | |
| Penalty | Z: Issued | 07/19/2012 | $0.00 | 08/09/2012 | Other |
Text For Citation: 02 Item/Group: 001 Hazard:
29 CFR 1910.217(f)(2): Supervision to ensure that correct operating procedures were being followed on mechanical power press(es) was inadequate: a) Therm-O-Disc, Incorporated - Mansfield, Ohio: On or about June 6, 2012, the employer did not assure that the operator(s) of the horizontal mechanical power press #5 was instructed in the safe operation of the press in that the key selector switch for the press run mode was not supervised. The key, used to change press modes, was kept in the selector switch and not supervised to assure that the press mode was not changed without the operators knowledge. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Translate