Violation Detail
Standard Cited: 95012901
Inspection Nr: 315609602
Citation: 01003
Citation Type: Serious
Abatement Date: 09/14/2011 X
Initial Penalty: $1,500.00
Current Penalty:
Issuance Date: 09/09/2011
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC):
Gravity:
Report ID: 0453720
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/21/2011 | 09/14/2011 | Serious | ||
| Penalty | Z: Issued | 09/09/2011 | $1,500.00 | 09/14/2011 | Serious |
Text For Citation: 01 Item/Group: 003 Hazard: STRUCK BY
North Carolina General Statute95-129(1) of the Occupational Safety and Health Act of North Carolina: The employer did not furnish each of his employees conditions of employment and a place of employment free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to a struck by hazard: a)job site- employees were using a Skyhoist boom truck to disassemble a large Giant Seattle Wheel ( ferris wheel). A hook had been attached to the wire rope of the boom truck using wire rope clips. Two of the three wire rope clips were installed improperly with the saddles of the clips on the dead rope side. Abatement Note: Among other methods, one feasible abatement method to correct this hazard is to follow ANSI B30.5-1968, Section 5-1.7.3- Reeving and install the wire rope saddles only on the live or long end of the wire rope cable.
Translate