Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 315303115
Citation: 01001
Citation Type: Serious
Abatement Date: 01/16/2012
Initial Penalty: $5,000.00
Current Penalty: $5,000.00
Issuance Date: 12/21/2011
Nr Instances: 2
Nr Exposed: 15
Related Event Code (REC):
Gravity: 05
Report ID: 0419400
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/11/2012 | $5,000.00 | 01/16/2012 | Serious | |
| Penalty | Z: Issued | 12/21/2011 | $5,000.00 | 01/16/2012 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: LIFTING
Section 5(a)(1) of Public Law 91-596, the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees, in that employees were exposed to a struck-by hazard due to the use of "Below-the Hook Lifting Devices" that did not have identification markings and were used to lift, suspend and move tools and material: (a)Panel Shop - On or about June 30, 2011 a "Below-the Hook Lifting Devices" used with the bridge crane to lift, suspend and move tools and material did not have identification markings such as but not limited to its rated capacity. Among others, one feasible and useful abatement method to correct this hazard is to follow the American National Standard, ASME B30.20-2006, Chapter 20-1.2.1 Marking - (b) Identification. All new structural and mechanical lifting devices shall be marked with, but not limited to, the following information: -Manufacturer's name and address -Lifter weight -Rated load