TranslateViolation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
| Violation Items | |||||
|---|---|---|---|---|---|
| Nr: 312269152 | Citation: 01001 | Issuance: 03/17/2009 | ReportingID: 0213900 | ||
| Viol Type: | Serious | NrInstances: | 1 | Contest Date: | 04/02/2009 |
| Abatement Date: | 04/10/2009 X | Nr Exposed: | 2 | Final Order: | 12/17/2010 |
| Initial Penalty: | $2,500.00 | REC: | Emphasis: | ||
| Current Penalty: | $1,500.00 | Gravity: | 03 | Haz Category: | UNAPEQUIP |
| Penalty and Failure to Abate Event History | |||||||
|---|---|---|---|---|---|---|---|
| Type | Event | Date | Penalty | Abatement | Type | FTA Insp | |
| Penalty | Z: Issued | 03/17/2009 | $2,500.00 | 04/10/2009 | Serious | ||
| Penalty | F: Formal Settlement | 09/23/2009 | $1,500.00 | 04/10/2009 | Serious | ||
| Penalty | J: ALJ Decision | 12/17/2010 | $1,500.00 | 04/10/2009 | Serious | ||
Text For Citation: 01 Item/Group: 001 Hazard: UNAPEQUIP
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to: a) Production Area- Dry Side: A fiberglass ladder was modified from the original manufacturer's specifications and used as a fixed ladder as part of a platform. One feasible and acceptable means of abatement is to install a metal industrial ladder manufactured for the purpose. Observed on or about 11/5/08 NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM, FAILURE TO DO SO WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 AS PER 29 CFR 1903.19.