Violation Detail
Standard Cited: 19100180 F Crawler locomotive and truck cranes.
Inspection Nr: 307492645
Citation: 01001
Citation Type: Serious
Abatement Date: 04/25/2006 X
Initial Penalty: $5,600.00
Current Penalty: $5,600.00
Issuance Date: 04/19/2006
Nr Instances: 1
Nr Exposed: 3
Related Event Code (REC): A
Gravity: 10
Report ID: 0626300
Contest Date: 04/28/2006
Final Order: 02/09/2007
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 02/09/2007 | $5,600.00 | 04/25/2006 | Serious | |
| Penalty | Z: Issued | 04/19/2006 | $5,600.00 | 04/25/2006 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: STRUCK BY
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: On or about 10/26/2005 and times prior thereto, at a workplace located at 2601 Wood Dr., Garland, Texas 75041, the employer exposed employees to struck-by hazard on a 23-ton, National, Series 900, hydraulic truck crane, by not following the manufacturer's procedures for stowing the jib. Among other methods, feasible means of abatement include but are not limited to the following: a)Follow the manufacturer's specific procedures for stowing the crane jib that are contained on pages 38 and 39 of the operator's and maintenance manual. OR IN THE ALTERNATIVE 29 CFR 1926.550(a)(1): The employer did not comply with the manufacturer's specifications and limitations applicable to the operation of crane(s) or derrick(s): a)On or about 10/26/2005 and times prior thereto, the employer did not follow the manufacturer's procedures to safely inspect the National Series 900, hydraulic truck crane.
Translate