Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 303392864
Citation: 01001
Citation Type: Serious
Abatement Date: 01/10/2002 X
Initial Penalty: $750.00
Current Penalty: $375.00
Issuance Date: 11/21/2001
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC):
Gravity: 03
Report ID: 0213900
Contest Date:
Final Order:
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 02/04/2002 | $375.00 | 01/10/2002 | Serious | |
| Penalty | Z: Issued | 11/21/2001 | $750.00 | 01/10/2002 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard: GUARDING
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to an amputation hazard. a) Machine Shop, Press Brake - Where point of operation guarding was not feasible, the employer did not develop and implement a minimum safe distance program for the protection of mechanical press brake operators. On or about 08/20/01. One feasible and acceptable abatement method is to develop and implement a safe distance program that conforms to the requirements of ANSI B11.3-1982, Paragraph 6.1.4.3 and OSHA Directive CPL 2-1.25. NOTE:ABATEMENT CERTIFICATION REQUIRED FOR THIS ITEM. Attached form or equivalent must be submitted. See page 2,"Notification of Corrective Action" for instructions.
Translate