Violation Detail
Standard Cited: 19100213 C03 Woodworking machinery requirements.
Inspection Nr: 1714263.015
Citation: 01006F
Citation Type: Serious
Abatement Date: 3
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/29/2024
Nr Instances: 2
Nr Exposed: 2
Related Event Code (REC):
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 06/18/2024
Emphasis:
Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
---|---|---|---|---|---|---|
Penalty | I: Informal Settlement | 06/18/2024 | $0.00 | Serious | ||
Penalty | Z: Issued | 05/29/2024 | $0.00 | Serious |
Text For Citation: 01 Item/Group: 006F Hazard:
29 CFR 1910.213(c)(3):Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut. a) On and before December 5, 2023, with respect to an establishment located 616 N. Perkins St, Appleton, WI 54914, employees in the Main Mill, Custom Area, were exposed to potential struck-by hazards when Tablesaw 1 was not equipped with nonkickback fingers or dogs to prevent material being cut from being thrown back into the direction of the operator. b) On and before December 5, 2023, with respect to an establishment located 616 N. Perkins St, Appleton, WI 54914, employees in the Main Mill, Custom Area, were exposed to potential struck-by hazards when Tablesaw 2 was not equipped with nonkickback fingers or dogs to prevent material being cut from being thrown back into the direction of the operator.